RAM Mount RAM-VB-145P-SW1 - Manual

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
SPECIFICATIONS
Placement
Passenger side, front, where seat rail frame attaches to
floor board.
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket
Construction/Finish
Steel/Black Powdercoat
Dimensions
Pole or Pedestal
Sold Separately
Weight
7 lbs.
A = 18.75", B = 4.25", C = 2.875”, Hole Centers = 16.5”
Features
RAM-VB-145P-SW1
RAM-VB-145P
Important Note
Installs in minutes with no drilling required
Low profile keeps mount away from passenger leg space
In 2006 model year vehicles, the seat leg bolts are tied to the air bag
system. Tampering with these may result in disabling the air bag system
and causing a severe safety hazard. The installation of this product into a
2006 vehicle should only be done by a Dodge factory authorized
technician or Up-fitter familiar with Police, Fire, and Rescue vehicles and
their fleet use.
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
COMPATIBLE VEHICLES:
RAM-VB-145P & RAM-VB-145P-SW1
DODGE CHARGER POLICE VEHICLES (2006-2010)
DODGE MAGNUM POLICE VEHICLES (2006-2011)