RAM Mount RAM-VB-139-SW1 - Manual (Page 2)

National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
INSTALLATION INSTRUCTIONS
1. Move the passenger seat back to its rearmost position and remove the front seat rail bolts. Store these bolts.
2. Align the holes in the base and seat frame legs with those in the floor board. The pedestal platform should be near
the console.
3. Pass the supplied longer bolts with washers through to the holes, into the floor board, and start the thread by hand.
4. Using a socket wrench, fully tighten the bolts to secure the no drill base into the vehicle.
5. After a week of use, check seat bolts and re-tighten if necessary.
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-139
HONDA ACCORD (2004-2007)