RAM Mount RAM-VB-154-SW1 - Manual (Page 2)

National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
INSTALLATION INSTRUCTIONS
1. Move the passenger seat back to its rearmost position and remove the front seat rail bolts. Store these bolts.
2. Without moving the seat, place the No-Drill™ base over the front of the seat frame
3. Align the holes in the metal base with those in the seat frame and floor board.
4. Re-install the new longer seat bolts and washers included with your kit and fully tighten.
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-154 & RAM-VB-154-SW1
NISSAN PATHFINDER (2005-2012)
NISSAN XTERRA 4X4 ONLY (2005-2012)
NISSAN FRONTIER 4X4 ONLY (2005-2012)