RAM Mount RAM-VB-127-SW1 - Manual (Page 2)

National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
INSTALLATION INSTRUCTIONS
Before installation, attach extension plate to the bottom of the base with the provided hardware.
1. Place both front seats in their most rear position.
2. Remove the drivers side front right and the passenger side front left seat mounting bolts (inner seat bolts).
3. Slightly lift both the passenger and driver seats and slide the No-Drill
TM
base between the floor of the vehicle and the
bottom of the seat.
4. Align the holes and reinstall all of the seat bolts that have been removed.
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-127
INNER SEAT MOUNTING BOLTS
DODGE RAM 1500 (1994-2001)
DODGE RAM 2500/3500 (1994-2002)