RAM Mount RAM-VB-175-SW1 - Manual (Page 2)

National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
INSTALLATION INSTRUCTIONS
1. Move the passenger seat back to its rearmost position and loosen the front seat rail nuts with a 15MM wrench.
2. Gently lift the front of the seat to create a small gap between the seat frame and seat track.
3. Align the slots in the base with the seat bolts and slide the base into place. Press the No-Drill™ base as far in as
possible so that the back of the slots engage the seat bolts. The pedestal platform should be near the console.
4. Re-tighten the nuts to secure the base. No-Drill™
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-175 & RAM-VB-175-SW1
DODGE GRAND CARAVAN (2008-2009, 2012-2013)
FORD TRANSIT CONNECT (2010-2013)
CHRYSLER TOWN & COUNTRY ( ) 2008-2009, 2012-2013
Special note: Once the base is installed, passenger side front seat travel will be limited. In order to collapse and store
the mid row seat behind the front passenger seat, the front passenger seat must be moved all the way forward. With
the base installed, this will not be possible. The mid row seat should be left up or stowed, whichever it to be the most
common orientation, prior to the installation of this product.