Grain Systems Tanks PNEG-1094 - Manual (Page 42)

6. Installation
42 PNEG-1094 Farm Grain Bin - 4" Corrugation
Platform and Handrail Assembly
Start by attaching the platform to the platform support using 5/16" x 3/4" bolts and nuts. Place all the
vertical angles in place, making sure to place the vertical entrance angle to the left front corner of the
platform. After all vertical angles are in place, attach front and side handrails as shown in
Figure 6N .
Use 5/16" x 3/4" bolts and nuts in all connections.
Figure 6N