Platform support assembly – Grain Systems Tanks PNEG-1094 User Manual

Page 39

Text mode
Original mode

6. Installation

PNEG-1094 Farm Grain Bin - 4" Corrugation

Platform Support Assembly

When starting the platform support, attach the mounting angle to the sidewall of the grain bin. Refer to

Page 36

for the correct holes to be used by the platform. Attach the angle using 5/16" x 3/4" bolts and nuts,

tighten at this time. Next, bolt the support angle to the mounting angle again using the proper holes.
Attach the brace angle to the mounting angle as shown in

Figure 6I

. Use 5/16" x 3/4" bolts and nuts for

all connections.

Figure 6I