Grain Systems Custom, Utility and Bulk Tank Augers PNEG-1435 - Manual (Page 22)

22 PNEG-1435 6", 8" & 10" Utility & Bulk Augers
4. ASSEMBLY & INSTALLATION
Installing Drive Shaft
1. Insert the Drive Shaft into the opposite end of flight with keyway facing outward. Align the
holes in the shaft and secure with Grade 8 bolts and stover nuts (See Chart) and
(Figure 4K) .
Figure 4K
Flight Hardware
6" 3/8" x 2" - 16 Grade 8 Hex Bolts
8" 7/16" x 3" - 14 Grade 8 Hex Bolts
10" 1/2" x 3-1/2" - 13 Grade 8 Hex Bolts
Bolts (See Chart)
Key Way
Drive Shaft
Stover Nut