Grain Systems Custom, Utility and Bulk Tank Augers PNEG-1435 - Manual (Page 15)

PNEG-1435 6", 8" & 10" Utility & Bulk Augers 15
4. ASSEMBLY & INSTALLATION
2. Slide the flight connecting shaft into the main section of flight and bolt together with Grade
8 Hex Bolt and Stover nut. Next slide extension flight onto connecting shaft and bolt
together using proper grade 8 bolts and stover nuts
(See Chart) and (Figure 4B) .
Figure 4B
Flight Hardware
6" 3/8" x 2" - 16 Grade 8 Hex Bolts
8" 7/16" x 3" - 14 Grade 8 Hex Bolts
10" 1/2" x 3-1/2" - 13 Grade 8 Hex Bolts
Bolt (See Chart)
Bolts (See Chart)
Stover Nut
Flight Connecting Shaft
Extension Flight
Main Flight
Main Auger Tube