Safety – Grain Systems PNEG-1459 User Manual
Page 6

6
PNEG-1459 L Series Operators
Decal: DC-973
Decal DC-973 is located on the rear ple-
num access door (inside and outside).
Decal DC-388 is located on the hitch tongue.
Decal DC-1249 is located on the hitch tongue.
Decal: DC-388
Decal: DC-1249
Decal: DC-1227
Decal: DC-1229
Decal: DC-1225
Decal DC-1227 is located on the fan/heater access door.
Decal DC-1229 is located on each of the meter roll access
doors.
Decal DC-1225 is located on the fan/heater access door.
Decal: DC-972
Decal: DC-971
Decal: DC-974
Decal DC-972 is located on the bottom
auger belt guard and the front bearing plate
(which is visible when then bottom auger belt
guard is removed). An alternate location
would be at the rear of the dryer for portable
dryers equipped with the Front Discharge
Option.
Decal DC-971 is located on the bottom
auger belt guard and the front bearing plate
(which is visible when then bottom auger belt
guard is removed). An alternate location
would be at the rear of the dryer for portable
dryers equipped with the Front Discharge
Option.
Another location for decal DC-971 is
the top auger belt guard (one on the belt guard
cover and one inside on the belt guard body
visible when the belt guard cover is remove).
Decal DC-974 has several different lo-
cations. Two are located on the front end
panel below the fan/heater. Two are located
on the rear end panel below the rear access
door. Two are located on the auger discharge
box (one on the outside top and one on the
inside of the flapper lid next to the discharge
mercury switch). One more of these decals
is located inside the plenum on the rear ple-
num closure door just inside the rear access
door.
SAFETY