beautypg.com

Assembly of roof exhauster – Grain Systems Tanks PNEG-4054A User Manual

Page 130

background image

Chapter 8: Accessories

Figure 8-7 Using the roof exhauster flashing and mounting plate as a template

I

Marked or scribed hole to be cut

6. After the roof panels are cut appropriately, install the roof panels onto the roof in the desired location.

Assembly of Roof Exhauster

Assembly of the roof exhauster is done prior to installing onto the roof.

1. Apply a strip of tube caulk (C) along the mating surface of the roof exhauster hood (B) and the

exhauster mounting plate (E).

2. Install the roof exhauster hood (B) to the exhauster mounting plate (E), and align all the holes.

3. Install hex head bolts (A) and flange nuts (D), securing the roof exhauster hood (B) to the exhauster

mounting plate (E).

130

Pneg-4054A 54 Ft Diameter 40-Series Bin

See also other documents in the category Grain Systems Equipment: