Notice, Safety decals, Decals – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1391 User Manual
Page 13
13
Decals
PNEG-1391 8",10", & 12" BE-SAW Augers
3
4
1
2
Decals are not shown actual size.
Safety Decals
5
1. READ AND UNDERSTAND THE INSTALLATION & OPERATION MANUAL AND ALL SAFETY
INSTRUCTIONS BEFORE OPERATING EQUIPMENT.
2. DO NOT OPERATE WHILE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL.
3. DO NOT OPERATE UNLESS ALL SAFETY EQUIPMENT, SWITCHES, GUARDS AND SHIELDS
ARE SECURELY IN PLACE AND OPERATIONAL.
4. BE SURE EVERYONE IS CLEAR OF THE EQUIPMENT BEFORE ATTEMPTING TO OPERATE
OR MOVING THE MACHINE.
5. ALLOW ONLY TRAINED PERSONNEL IN the OPERATING AREA.
6. KEEP HANDS, FEET, HAIR AND CLOTHING AWAY FROM MOVING PARTS.
7. DISCONNECT AND LOCKOUT POWER BEFORE ADJUSTING OR SERVICING.
8. ELECTRICAL WIRING OR SERVICE WORK MUST BE PERFORMED BY A QUALIFIED
ELECTRICIAN. IT MUST MEET ALL STATE AND LOCAL ELECTRICAL CODES.
9. EMPTY AUGER AND LOWER TO TRANSPORT POSITION BEFORE TRANSPORTING.
10. MAKE CERTAIN ALL ELECTRIC MOTORS ARE GROUNDED.
11. NEVER MOVE MACHINE MANUALLY. ALWAYS USE A TOWING VEHICLE.
12. KEEP CHILDREN AWAY FROM WORK AREA AT ALL TIMES.
DC-1446
NOTICE
SHEAR POINT
FAILURE TO HEED
WILL RESULT IN
SERIOUS INJURY OR DEATH!
KEEP FINGERS, HANDS, HAIR AND
LOOSE CLOTHING AWAY FROM
MOVING PARTS.
DC-1411
ELECTROCUTION!!
STAY CLEAR OF POWER LINES!
• THIS EQUIPMENT IS NOT INSULATED FROM ELECTRIC SHOCK.
• KEEP EQUIPMENT AWAY FROM POWER LINES.
• ELECTROCUTION CAN OCCUR WITH OR WITHOUT DIRECT
CONTACT.
FAILURE TO HEED WILL RESULT
IN SERIOUS INJURY OR DEATH!
DC-1412