Grain Systems Unload Augers PNEG-1430 - Manual (Page 16)

4. Assembly
16 PNEG-1430 6"-6", 6"-8", 8"-8", 8"-10" and 10"-12" 25° Bin Unloader
Installing the Belt Guard Brackets
1. Align the holes on the bearing plate with the slots on the belt guard mounting brackets.
2. Secure the brackets with proper bolts, flat washers and serrated flange nuts. (See Chart below and
Figure 4H.)
Figure 4H
NOTE: DO NOT tighten the bolts completely. The brackets will need to be rotated to align the slot in the
belt guard with the shafts on the motor and flight.
Belt Guard Mounting Bracket Bolt
Part # Bolt Size Description
S-1196 6" to 6", 6" to 8" and 8" to 8" 5/16"-18 x 1" Grade 5 Bolt
S-2071 8" to 10" and 10" to 12" 3/8"-16 x 1-1/4" Grade 5 Bolt
(See Chart for Bolt Sizes.)