Grain Systems Unload Augers PNEG-1430 - Manual (Page 13)

4. Assembly
PNEG-1430 6"-6", 6"-8", 8"-8", 8"-10" and 10"-12" 25° Bin Unloader 13
Attaching Support Stand to Tube
1. Place support stand and half band around tube and secure together with 5/16" bolts and serrated
flange nuts. (See Figure 4C.)
Figure 4C
Attaching Flights
1. Pull bin unload flight out of unload tube approximately one foot (1').
2. Remove bearing connecting stub bolts and nuts from connecting stub.
3. Position 25° unloader assembly in-line with bin tube.
4. Align holes in unload flight with holes in bearing connecting stub and slide flight onto stub.
5. With holes aligned, secure with bearing connecting stub bolts and nuts that were removed in Step 2 .
(See Figure 4D.)
Figure 4D
(See Chart for Bolt Sizes on Page 16.)