Grain Systems Unload Augers PNEG-1430 - Manual (Page 10)

10 PNEG-1430 6"-6", 6"-8", 8"-8", 8"-10" and 10"-12" 25° Bin Unloader
3. Safety Decals
Check components shown below to ensure that the safety decals are in place and in good condition. If a
decal cannot be easily read for any reason or has been painted over, replace it immediately. Contact your
dealer or the manufacturer to order a replacement decal free of charge.
Contact:
The GSI Group
1004 E. Illinois St.
Assumption, IL. 62510
Phone: 1-217-226-4421
DC-994 DC-1381
DC-1234 DC-1379
CAUTION
FAILURE TO PROPERLY SELECT,
INSTALL OR MAINTAIN AN AUGER, ITS
DRIVE OR OTHER COMPONENTS CAN
RESULT IN DANGEROUS OPERATION.
THIS EQUIPMENT IF IMPROPERLY
SELECTED, INSTALLED OR
MAINTAINED MAY FAIL AND COULD
RESULT IN SERIOUS INJURY OR
PROPERTY DAMAGE.
CHECK PRODUCT LITERATURE AND
EQUIPMENT MANUFACTURER’S
LITERATURE OR CALL THE FACTORY
FOR FURTHER INFORMATION.
DC-1234
SHEAR POINT
Keep clear of rotating auger and
moving parts.
Do not remove or modify guards.
Disconnect and lock out power
before servicing.
Failure to do so will result in
serious INJURY or DEATH.
DC-1381
SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-994