Grain Systems PNEG-1936 - Manual (Page 19)

Chapter 2: Top Platform Assembly
Assembly of Inside platform rail to sidewall attachment brackets
Table 2-6 Assembly Sequence
Callout Part number Quantity
E STR-1171 1
A , C S-7927 , S-968 4 , 4
NOTE: Do not tighten the inside platform rail. It should
be tightened only after the platform planks are
attached.
Assembly of platform plank to inside platform rail and knee brace
Table 2-7 Assembly Sequence
Callout Part number Quantity
E STR-1171 —
H STR-1173 1
A , C S-7927 , S-968 4 , 4
NOTE: Make sure the bolts and nuts are oriented
properly.
Assembly of platform plank to inside platform rail and knee brace
Table 2-8 Assembly Sequence
Callout Part number Quantity
H STR-1173 1
A , C S-7927 , S-968 4 , 4
NOTE: Make sure the bolts and nuts are oriented
properly.
PNEG-1936 Top Dryer 19