Grain Systems PNEG-1936 - Manual (Page 17)

Chapter 2: Top Platform Assembly
Assembly of sidewall attachment brackets and knee braces to stiffeners
Table 2-2 Assembly Sequence
Callout Part number Quantity
B STR-1162 2
A , C S-7927 , S-968 6 , 6
D STR-1165 2
A , C S-7927 , S-968 4 , 4
NOTE: Start the assembly with the stiffener on the
sidewall sheet below the manway hole loca-
tion on the roof.
Assembly of sidewall attachment bracket and knee brace to sidewall sheet
Table 2-3 Assembly Sequence
Callout Part number Quantity
B STR-1162 1
A , C S-7927 , S-968 3 , 3
D STR-1165 1
A , C S-7927 , S-968 2 , 2
IMPORTANT: B and D should be centered and aligned
exactly between the two sidewall stiff-
eners. Field drill the holes in the side-
wall sheet to attach B and D.
Assembly of sidewall attachment bracket and knee brace to stiffener
Table 2-4 Assembly Sequence
Callout Part number Quantity
B STR-1162 1
A , C S-7927 , S-968 3 , 3
D STR-1165 1
A , C S-7927 , S-968 2 , 2
NOTE: Align B to the stiffener holes (10,11 and 12)
from the top of the sidewall sheet.
PNEG-1936 Top Dryer 17