Grain Systems Tanks PNEG-4135 - Manual (Page 117)

Chapter 7: Roof Assembly
6. Secure with flange bolts (L) and flange nuts (J).
7. Locate the column of three holes (K) that are not paired together on the inside radius of the center
collar, and install a center collar channel clip (M).
8. Secure with flange bolts (L) and flange nuts (J).
9. Repeat this procedure for the remaining five center collar channel clips (M, N and O).
IMPORTANT: Ensure that the center collar channel clips (M, N, O, and P) are assembled in specified
holes as the relative orientation of these clips is critical for assembling the center
collar channels and cap plates assembly.
Figure 7-31 Installing center collar channel clips
J 1/2 in. flange nut (S-10253) N Center collar channel clip (CTR-0361)
K Row of three holes O Center collar channel clip (CTR-0330)
L 1/2 x 1-3/4 in. flange bolt (S-10252) P Center collar channel clip (CTR-0362)
M Center collar channel clip (CTR-0284)
Pneg-4135 135 Ft Diameter 40-Series Bin 117