Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1056 - Manual (Page 4)

- 4 -
Introduction
We encourage all personnel operating, installing, or maintaining this
equipment to thoroughly read this manual before proceeding. Successful
operation is our intention; however, if in fact you are in need of technical
advice or support, we encourage you to contact your local dealer/distributor
or contact the factory at any time during regular business hours at 217-226-
4421. Our commitment is to you the customer, and we encourage your input
and/or suggestions that would help better our product.
This manual covers general information on incline conveyor (straight and
bend incline configurations) installation. Due to the varying sizes of
equipment it would be very difficult to cover every aspect of installation. We
offer one method for erecting conveyors but many times the contractor’s
experience and techniques will work. Many times conditions and
surroundings do not allow certain practices during the erection of
equipment. We cannot be responsible for the erection of the conveyor
(unless so contracted to do so).
Safety Information
It is the responsibility of the buyer to make this manual available to the person
or persons involved with this equipment. Guards and safety labels have been installed prior to the
equipment leaving the manufacturing plant. These devices are not to be removed, altered, or defaced,
otherwise voiding any liability or responsibility of the manufacturer. Power lock out is very important prior
to installation, adjustment, and maintenance of the unit.
Equipment Information
Model Number:
Serial Number:
Date Purchased:
Dealer/Distributor:
Operato
r’s
Manual
DANGER
Disconnect and
Lockout Electric
Power Before
Servicing Unit