Grain Systems PNEG-588 - Manual (Page 17)

17
Deluxe Centrifugal Heater
OPERATING PROCEDURE
Adjusting the vaporizer coil on a liquid propane model.
The top photo shows the setting up (cool),
and the bottom photo shows the coil down (hot).
Adjusting The Vaporizor
1. Vaporizer should be adjusted so
the vapor pipe train runs warm
to the touch (100°-120°F).
2. Loosen 5/16" bolts on adjust-
ment bracket.
3. Raise vaporizer if running too
hot, lower if too cold.
4. Move vaporizer only 1" at a time
and allow a few minutes for tem-
perature to equalize.
5. Tighten 5/16" bolts and watch
heater run for several minutes
to verify adjustment.