Grain Systems PNEG-1342 - Manual (Page 53)

- 53 -
1200 Series Parts Manual
13 14 15 16 12
Right & Left Grain and Plenum High Limits
Upper plenum high limit thermostat conduit.
Lower plenum high limit thermostat conduit.
ITEM No. DESCRIPTION PART No.
1 HIGH LIMIT MOUNTING BRACKET D01-0254
2 plenum-thermostat 10' 300deg (for 14' dryers only) D03-0004
2 PLENUM-THERMOSTAT 24' 300DEG (for dryers that are 16' and longer) D03-0377
3 ENCLOSURE 4x4x2.5 WHITE PVC FH-6972
4 SEALTITE PVC 3/8" FH-7038
5 ELBOW 3/8" 90 DEGREE PVC W/NUT FH-7050
6 grain thermo hi-lmt 10' 210deg (for 14' dryers only) D03-0005
6 GRAIN THERMO HI-LMT 24' 210DEG (for dryers that are 16' and longer) D03-0378
7 CONNECTOR 1/2" EMT COMPRESSION D03-0054
8 CONDUIT 1/2" EMT METALLIC D03-0057
9 GRAIN TEMP THERMISTOR SER2000 D03-0258
10 SEAL 3/8 STRAIGHT PVC W/NUT FH-7049
11 CONNECTOR 3/8" LIQUID-TITE TO 1/2" EMT D03-0060
12 CLAMP 1/2" CONDUIT HH-1096
13 CONDUIT BODY, LL TYPE D03-0375
13 COVER ALUMINUM, CONDUIT BODY TFC-0075
14 PLENUM THERMISTOR BOLT HF-7236
15 PIPE SCH 40 1/2" DM60001
16 CLAMP, BEAM 1/2" GT3-0241
not shown conduit 1/2" emt metallic D03-0057
not shown connector 1/2" emt compression (2/conduit; 1 at each end of the dryer.) D03-0054
not shown coupler 1/2" emt compression (couples the lengths of 1/2" emt) D33-0002
not shown
enclosure 4x4x2.5 white pvc (as of 2003 a 4x4 enclosure has been added to these
assemlies and is mounted on the rear column end panels into which thr grain high
limit thermostat conduits now terminate.)
FH-6972
the following components make up the grain high limit conduits that run through the grain columns. The
conduit assemblies are not shown in the photos.