Grain Systems Tanks PNEG-1912 - Manual (Page 80)

15. Parts List
80 PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series
7' Diameter 67° Hopper Tank Specifications
IMPORTANT: Vertical seams of body sheets with leg holes MUST be bolted together to provide 65-5/8"
(1667 mm) between leg holes.
IMPORTANT: Bolt heads are inside of bin at the leg to body attachment and on all vertical seams on
hopper panels. All bolts to be tightened from the nut side only. Refer to detail on Page 24
for location of caulking. No cross tie bracing required.
Under Collar Clearance
16" Collar 30.3/8" (771 mm)
22" Collar 36.1/2" (927 mm)
Model Sidewall Gauge
BFT 7'-7 Ring 13-13-14-16-18-20-20
BFT 7'-8 Ring 13-13-13-14-16-18-20-20