Grain Systems Tanks PNEG-1912 - Manual (Page 41)

PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series 41
9. Safety Cage
Ladder System With Safety Cage
Extension Rail Installation
Before the safety cage can be installed, the ladder extension rails must be attached. Start by bolting
the spacer brackets through the top and bottom set of holes in the top ladder section. Then, attach the
extension rail to the spacer brackets as shown in
Figure 9A . When installed correctly, the bottom of the
extension rail should be flush with the bottom of the top ladder section. Use 5/16" x 3/4" bin bolts for
all connections.
Figure 9A