Grain Systems Tanks PNEG-1912 - Manual (Page 39)

8. Optional BFT Ladder Assembly
PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series 39
Ladder Section Assembly
Two (2) splice plates are required to attach each additional ladder section. The head of the bolt should be
to the inside of the ladder with the splice plate on the outside as shown in
Figure 8L . Use 5/16" x 3/4" bolts
for all connections.
NOTE: With most installations, the last ladder section to reach the concrete will need to be cut to fit.
Figure 8L