Grain Systems Tanks PNEG-1912 - Manual (Page 32)

8. Optional BFT Ladder Assembly
32 PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series
Starter Bracket Installation
The starter brackets must be centered in the roof sheet to ensure proper installation of the roof ladder
support brackets. Before the starter brackets can be installed, two (2) 3/8" holes must be drilled. The
holes must be 2.66" below and directly in line with the top row of pre-punched horizontal holes 18-3/4"
apart. Refer to
Figure 8B for additional clarification of hole locations. Use 5/16" and 3/4" bin bolts
for connections.
Figure 8B