Safety cage hoop assembly – Grain Systems Tanks PNEG-1912 User Manual

Page 43

Text mode
Original mode

9. Safety Cage

PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series

Safety Cage Hoop Assembly

To complete the safety cage hoop installation, some pre-assembly is required. Attach four (4) safety cage
brackets to the extension rails and two (2) safety cage brackets to the second 4' ladder section as shown
in

Figure 9C

. See cage hoop bracket detail

on Page 44

for proper installation. Next, bolt each set of safety

cage hoop halves together using 5/16" x 3/4" bolts with the head of the bolt to the inside of the safety cage.
You may now bolt these assemblies to the safety cage brackets. Tighten bolts as you go.

Figure 9C