Grain Systems Tanks PNEG-1912 - Manual (Page 59)

PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series 59
12. Legs and Leg Bracing
Tank Legs and Leg Braces
Leg Size Chart
When installing legs to sidewall, reverse the normal insertion procedure for bolts. Place hex head and
neoprene washer to inside of sidewall, leaving threaded portion of bolt protruding outward. This provides
for a weather-tight seal at the leg attachment location.
See Pages 59-61 for leg attachment to sidewall
sheet details.
Put all legs on, but DO NOT TIGHTEN until all braces are in place. Be sure to put leg braces on
properly.
(See Pages 60-61.)
Figure 12A
Tank Size Hopper # of Rings Length Leg Coverage
6' Diameter Tank 60° 5-8 Rings 133" 1-3/4 Rings (56")
7' Diameter Tank 67° 7-8 Rings 165-1/2" 1-3/4 Rings (56")
7' Diameter Tank 45° 7-8 Rings 120-3/4" 1-3/4 Rings (56")
9' Diameter Tank 60° 7-11 Rings 165-1/2" 1-3/4 Rings (56")
9' Diameter Tank 45° 7-11 Rings 132-3/4" 1-3/4 Rings (56")
Failure to follow instructions may cause damage or failure of the equipment.
WARNING