Grain Systems Tanks PNEG-1912 - Manual (Page 64)

12. Legs and Leg Bracing
64 PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series
Braces attach horizontally to the legs with 3/8" hardware and to the hopper with 5/16" hardware.
Hopper braces are to be spaced equally around tank. Hopper braces are required on all hopper tanks.
Refer to chart
on Page 65 for the quantities required.
NOTE: Hopper braces attach between the legs and the collar/hopper horizontal seam. Never bolt the
braces directly to the hopper seam above the collar. Use 16" braces with 16" collar and 22" braces
with 22" collars.
Figure 12I
Figure 12J
Figure 12K