Grain Systems PNEG-1263 User Manual
Page 23

23
2002 Top Dry Service School
Programming Set-up Variables
•
Turn the Control Power “ off “
•
Turn the Control Power switch “ on “
with the Program Temperature switch
held down.
•
Press the Increase switch until 3 is on
the display.
•
Press the Program Temperature switch
again.
•
C or no C will bill displayed.
•
Use the Increase or Decrease switch to
toggle between C or no C.
C - Hi-Lo cycling heater
no C - On/Off cycling heater
•
When the correct selection is on the
screen press the Program Tempera-
ture switch again.
•
H or no H will be displayed.
•
Use the Increase or Decrease switch to
toggle between H or no H.
H - Humidity sensor present
no H - No humidity sensor
present
•
When the correct selection is on the
screen press the Program Temperature
switch again.
•
F or C will be displayed.
•
Use the Increase or Decrease switch to
toggle between F or C.
F - Temperatures displayed in
Fahren-
heit.
C-Temperatures displayed in
Celsius.
•
When the correct selection is on the
screen press the Program Temperature
switch again.
•
L or no L will be displayed.
•
Use the Increase or Decrease switch
to toggle between L or no L.
L - The dryer will advance to
the Cool cycle when the Dry
timer has reached zero and the
Grain temperature set point
has been met.
noL - The dryer will advance
to the Cool cycle when either
the Dry timer has reached zero
or the Grain temperature set
point has been met.
•
When the correct selection is on the
screen press the Program Temperature
switch again.
Series 2000 Batch Fan / Heater
Software Diagnostics