Grain Systems PNEG-588-04 - Manual (Page 12)

5. Installation
12 PNEG-588-04 Deluxe Downwind Heater Installation and Operation
CF-10 Centrifugal Fan and CHD-15 Model Heater
Figure 5B shows the factory configuration. No change is required to the heater.
Retrofit applications require holes to be drilled in the upper and lower profile angles and the vertical angle
to be installed with the noted hardware.
Figure 5B CHD-15 Heater
CF-15 Centrifugal Fan and CHD-15 Model Heater
The vertical profile angles must be removed for correct operation of the heater.
Ref # Part # Description
A Upper Angle
B HF-8076 Profile Angle - Side for CHD-15 (2)
C Lower Angle
D S-3611 Flange Nut 5/16"-18 YDP Grade 2 (4)
E S-6606 Flange Bolt 5/16"-18 x 3/4" ZN Grade 5 (4)