Danze D423058 - Installation Manual - Manual (Page 9)

10.
CONNECT HOSES TO SENSOR CONTROL BOX:
Connect supply hoses (marked green) to inlet
fittings (marked green) at mixing valve on control
box. Note: the connection should be "hot to hot"
and "cold to cold". Connect the spout connection
hose to the discharge port of the control box and to
the Y adapter (red to red).
After installing faucet, remove aerator and flush
the faucet to remove any leftover debris.
Reinstall the aerator.
9.
Cold
Hot
Cold
Hot
Red marker
Green marker
Green marker
Green marker
Green marker
Red marker
9
10
© 2009 Danze, Inc. All rights reserved.