Danze D423058 - Installation Manual - Manual (Page 5)

INSTALL VEGETABLE SPRAY ASSEMBLY:
4.
4.1. Remove plastic mounting lock nut from spray holder and insert
the spray holder from above into the mounting hole. Use lock nut
to securely attach to the sink.
4.2. Attach the spray hose to the spray head.
4.3. Insert spray hose through spray holder and install the hose
adapter to the brass tube labeled "For Spray Hose". Make sure
sprayer hose remains unobstructed and does not become tangled
with other hose beneath the sink.
3.3. Connect the hose adapter (marked ORANGE) to discharge
fitting (marked ORANGE) and the other end of hose (marked
BROWN) to Y adaptor(Marked BROWN). Tighten carefully.
Copper connections can be spread slightly to facilitate the
attachment and tightening of the hoses.
3.3
A
A
B
B
Brown marker
Orange marker
Discharge to spout (ORANGE)
To vegetable spray
(labeled"For Spray Hose")
Water supply (BLUE)
(the long tube labeled
"For Hot Side")
3 . 4 2 . 4 1 . 4
© 2009 Danze, Inc. All rights reserved.