VANCO VPW-280755 - Manual (Page 16)

AVR 7.1 Audio EDID COPY to Blu-ray source (AV Receiver copy)
For users who wish to copy EDID from an AV Receiver with 7.1 channel audio to a specific input port
containing a Blu-ray player, follow a variation on the instructions above:
1. Set the DIP switch to the above position with the matrix in the OFF position.
2. Connect the AVR to your desired OUTPUT port on the matrix (for example, OUTPUT 2)
3. Power ON the matrix and select your INPUT on the AVR, making sure your chosen SOURCE is connected
to (for example, INPUT 3 – Blu-ray)
4. Press and hold the OUTPUT SELECT button for 3 seconds for the EDID data to be copied from OUTPUT 2
(AVR) to INPUT 3 (Blu-ray).
Remaining settings no function (reserved for future updates)
EQ Distance Adjustment Settings
Occasionally, the installation environment, such as the distance between source and display may be a factor in
the perfect transmission and reception of a signal.
In addition to the VPW-280755 LONG CABLE settings on the Matrix DIP switch, the RECEIVER balun can be
further fine tuned depending on the length of Cat5e/6/7 cable
used for optimum performance.
ATTENTION Please ensure the balun is switched OFF when changing the dial to desired distance setting.
Changes become effective when turned back ON.
www.vanco1.com
888.769.4156 16