ACP MMS10TS Owner's Manual - Manual (Page 8)

8
11. Programming Mode
1) This mode allows the user to assign cook times and
power levels to the keypad number keys.
2) Open the door and press Number Key 1 for
5 seconds. The buzzer sounds once to indicate
Programming Mode is activiated.
3) LED displays “ProG”.
4) Press a number key to change or review setting.
5) Press key, LED will display the saved time. Input
the desired new time.
6) Press , , , or to input the power level.
LED will display the related power. If the same key is
pressed twice, the power will change to PL10 ( Power
Level 10 or full power). If no power chosen, PL10 is the
default.
7) If X2 is pressed, LED displays “CF:80”. The default
factor of 80%. To change the cooking factor, press
desired Number Key for new factor.
8) After setting the time and power, press key to
save the cooking program. LED displays “ProG”.
9) If total cooking time entered exceeds the maximum
time allowed User Option 7, when
key is pressed
to save the program. If the program chosen exceeds the
maximum time allowed by User Option 7, then the oven
will beep three times and display 00:00 to indicate the
program is unacceptable.
10) Close the door and the oven will return to Ready
Mode.
Press key and the oven will return to Door Open
Mode.
11) Program example for a cook setting of 1 minute and
25 seconds at 70% power.
Step1: Open oven door and press Number Key “1” for 5
seconds, LED displays”ProG”.
Step 2: Press Number Key “3”. The program will be
saved in “3”.
Step 3: Press key, LED displays “0:00”.
Step 4: Press Number Keys “1”, “2” and “5” to input the
cooking time, LED displays 1:25.
Step 5: Press key to input 70% power level. LED
displays “PL7”.
Step 6: Press key to save. To use this program
Electronic Control Operation
press “3”. The oven will start operating for 1:25 @70%
power.
Note:
1. If the electric supply is interrupted, the saved program
will not be lost.
2. Pressing key returns the oven to Ready Mode
and cancels entered settings
12. Double Quantity Cooking
1)The X2 pad allows two quanities of the same food item
to be cooked at once
2) Press X2 key and then Preset Program Number(s)
0-9 with in 5 seconds. The oven will start cooking per the
quantity preset cooking time.
3) Press X2, LED displays “doub”. Press
preprogrammed number key, LED displays the cooking
time for two quanities.
Example: If number “5” key is programmed to cook
for 1:00, when first pressing X2 key and then pressing
number “5” key, the oven will automatically set the cook
time to 1:48. (1:00 cook cycle x 80% “X2” cook factor =
1:48)
4) When the cooking program finishes, the oven will
enter End of Cook Cycle Mode.
Note: X2 function may be used only with Programming
Mode cooking.
13. Stage Cooking Programming
1) This allows food items to be cooked using a
combination of various Power Levels and times.
2) A maximum of three stages can be set.
After setting the power and time for the first stage, press
key to set the second stage.
Repeat to set the third stage.
3) When setting the second and the third stage, press
key LED displays “S-2” or “S-3”.
4) Press key to start cooking.
Program example for two stages. Stage 1: 1 minute 25
seconds @ 70% power; Stage 2: 5 minutes 40 seconds
@50% power.
Step 1: Open oven door and press Number Key ”1” for
5 seconds LED displays “ProG”.
Step 2: Press Number Key “3”. The program will be
saved in “3”.