ACP MMS10TS Owner's Manual - Manual (Page 7)

7
Electronic Control Operation
5. Pause Mode
1) This mode allow users to temporarily stop the cooking
cycle to inspect or stir the food item.
2) While in Time Entry Mode or Preset Program Cook
Mode, if the door is open and closed, or if the
key is
pressed, the oven will enter Pause Mode.
3) While paused, LED will display the remaining cooking
time.
4) Pause Mode will expire back to Idle Mode in the exact
fashion as Ready Mode, dependent on User Option 61.
5) Additionally, if the
key is pressed, the oven will
immediately enter Ready Mode. If key is pressed,
the oven will resume the cooking cycle.
6. Time Entry Mode
1) The user may manually enter a cook time and power
level while in this mode.
2) While the oven is in the Ready Mode, pressing the
key will put the oven into Time Entry Mode.
3) During this mode, “00:00” displays.
4) Press , , , or key to
select power level, LED will display the related power.
If the same key is pressed twice, the power will change
to PL10 ( Power Level 10 or full power). If no power
chosen, PL10 is default.
5) During setting process, press key to enter Time
Entry Mode and begin cooking. Press key to enter
Ready Mode.
7. Manual Cook Mode
1) This mode allows cooking of the food items. While
in Manual Cook Entry Mode, pressing the
key will
cause to the oven to begin Manual Cook Mode.
2) During this mode, cooking time displays. The fan
operates and oven light is on.
3) When cooking program is finished, the oven will enter
End of Cook Cycle Mode. If you press
key while in
this mode,the oven will enter Pause Mode.
8. End of Cook Cycle Mode
1) After the time has expired in a Manual Cook Mode, or
a Preset Program Cook Mode, the oven will go into The
End of Cook Cycle Mode.
(2) During this mode, “End” displays.
(3) If either User Option OP:11 or OP:12 is selected, the
oven will continue to sound until the user acknowledges
by either opening and closing the door or pressing the
key. User Option OP:10 is the default and after the 3
second beep, the oven will go into Ready Mode.
9. Preset Program Cook Mode
1) This mode allows cooking of food items through a one
key touch operation. While in Ready Mode, pressing a
Number Key on the keypad will cause the oven to run
the Preset Program associated with that key.
2) LED displays the remaining cooking time. If it is multi-
stage cooking, the total remaning cooking time displays
not a particular stage cooking time.
(3) If the program chosen exceeds the maximum time
allowed by User Option 7, then the oven will beep three
times and display 00:00 to indicate the program is
unacceptable.
(4) When the cooking program finishes, the oven will
enter End of Cook Cycle Mode. If you press
key
while in this mode, the oven will enter Pause Mode.
Factory Preset Time Settings
Preprogrammed Pad Time:
1 10 sec.
2 20 sec.
3 30 sec.
4 45 sec
5 1 min.
6 1:30 min.
7 2 min.
8 3 min.
9 4 min.
0 5 min.
10. On the Fly Cooking
1) The user may start another cook cycle while the oven
is operating or paused.
2) While the oven is operating or while in the Pause
Mode and if User Option OP:51 is selected pressing a
Number Key will automatically start the preset cooking
program associated with the selected number key.
3) LED displays the remaining cooking time.
4) When cooking program finish, the oven will enter End
of Cook Cycle Mode. If you press
key while in this
mode, the oven will enter Pause Mode.