ACP MOC24 Owner's Manual - Manual (Page 8)

8
Manual Operation
To cook food using a specific entered time and power level.
1. Place food in oven. Close door.
2. Press TIME ENTRY pad and enter cooking time.
3. Press POWER LEVEL pad to program level of microwave power if
less than 100% is desired.
• For a lower microwave power, press pads 1 (for 10%),
through 9 (for 90%), or 0 for no microwave energy.
4. Press START pad.
5. At end of cooking cycle oven door opens.
6. Remove food from oven. Door remains open and ready for next item
to cook.
Using the Oven Control
Preprogrammed Pads
To cook food using preprogrammed cooking sequences.
1. Place food in oven. Close door.
2. Press desired pad.
3. Oven begins to cook.
4. At end of cooking cycle oven door opens
Interrupting Operation
Press STOP pad to interrupt
or stop operation.
Canceling Mistakes
• If oven is not cooking, press
STOP pad to clear display.
• If oven is cooking, press
STOP pad once to stop
oven.
Pad Time Pad Time
1 5 sec. 6
2 10 sec. 7
3 15 sec. 8
4 20 sec. 9
5 25 sec. 0
Factory Settings
30 sec.
35 sec.
40 sec.
45 sec.
60 sec.
“Factory program times may vary on certain models”
Open Door
• Press STOP pad to open
door.