Velleman LEDC13 - Manual (Page 5)

LEDC13
V. 01 – 28/03/2013 5 ©Velleman nv
Step 5 – Reconnect the connector cable
 Make sure the connector is fully opened.
 Insert the cable and close the connector.
You can now close the touch panel.
5. Wiring
Wire the controller as follows:
6. Operation
On/Off
To turn the lights on or off, short press
.
To set the dimmer, long press .
7. Technical Specifications
power supply 12 - 24 VDC
maximum load 3 x 4 A
PWM frequency ± 900 Hz
external dimensions 86 x 86 x 13 mm
internal dimensions 57 x 65 x 24 mm
weight
150 g
caution output current of power supply must not
exceed 3 x 4 A.
Suitable power supplies:
144 W / 12 V or 288 W / 24 V.