Camera access with internet explorer, 1 camera login, 2 control panel overview – Velleman CAMIP13 Quick Installation Guide User Manual
Page 6
2
2. CAMERA ACCESS WITH INTERNET EXPLORER
This network camera can be accessed via Microsoft® Internet Explorer® and iPhone / iPad / Android mobile devices
with our self-developed program “EagleEyes” installed depending on different using situations.
Note: For details about accessing network cameras via iPhone / iPad / Android mobile devices, please
refer to
http://www.eagleeyescctv.com
.
Before using the camera, make sure you have configured the network settings, and the network connection is fine.
For network configurations, please refer to:
“
Quick Setup With iPhone / iPad” supplied with your camera if you’re using iPhone / iPad, and your network
environment is wireless.
“
ADVANCED NETWORK SETUP” downloadable from
www.surveillance-download.com/user/n807a.swf
if your network
environment is not wireless.
2.1 Camera Login
Step1: Open your web browser, and key in
http://ipaddress:portnum
in the URL address box.
For example, for the IP address 60.121.46.236 and port No. 888, please key in ”http://60.121.46.236:888” into
the URL address box, and press “Enter”.
Step2: In the login page, key in the user name and password, and enter the security code from the image below if any.
Then, click “LOGIN”.
Step3: The wizard is then started.
‧
To skip the wizard and directly access the camera live view, click “Close”.
‧
To directly access the camera live view without starting the wizard for the login next time, check “Do not start wizard at login”.
Note: If you’re prompted to install “VLC player”, “Software” and “H264 Streaming Viewer”, please
agree to proceed the installation.
Step5: When the login is successful, the live view is shown.
2.2 Control Panel Overview
Note: The buttons available depend on the user level used to log in.