Velleman CAMIP13 Quick Installation Guide - Manual (Page 20)

16
3.7.2 Time
Set daylight saving time and the current time, and click “Save” to confirm.
Function Description
Time Configuration
Date Set the current date.
Time Set the current time.
Daylight Saving Time Configuration
Daylight Saving Time Specify whether to use daylight saving time (Enable / Disable).
If this function is enabled, set the time period (Start Time / End Time), and adjust the daylight
saving time in hours (Adjust Time).
3.7.3 Server Log
Note: This function is available only for “Supervisor”.
To quickly search the system logs you want by event type, click “Prev. Page” or “Next Page” to find the logs you
want, or check the event type(s) and click “Reload” to start searching.
To clear all system event logs, click “Clear All”.