Velleman CAMIP13 Quick Installation Guide - Manual (Page 10)

6
3. CAMERA CONFIGURATIONS
Users can further configure this network camera by accessing via Internet Explorer.
Note: You need to be “Supervisor” or “Power User” to enter the system configuration page. If not,
please re-log into the camera with the supervisor user level.
3.1 System configuration menu
Click “Config.” to enter the configuration page.
Note: You need to be “Supervisor” or “Power User” to enter the system configuration page, and the
functions available for these two user levels are different. If you’re not either of these two user
levels, please re-log into the camera with one of them.
The functions are categorized into six menus: Network, Camera, Record Timer, Storage, Trigger and General.
For details about “Network”, please refer to “3.2 Network” at page 7.
For details about “Camera”, please refer to “3.3 Camera” at page 9.
For details about “Record Timer”, please refer to “3.4 Record Timer” at page 12.
For details about “Storage”, please refer to “3.5 Storage”’ at page 13.
For details about “Trigger”, please refer to “3.6 Trigger” at page 13.
For details about “General”, please refer to “3.7 General” at page 15.
Main Menu Sub-Menu Reference
Network Network Configure network settings.
DDNS Enter DDNS information when the network type is PPPOE or DHCP.
SNTP Synchronize your camera time with the networked computer systems.
FTP
Enter the FTP information for event notifications when “FTP” is chosen in “Trigger” →
“Trigger”.
Mail Enter Email information for event notifications when “Email” is chosen in “Trigger” → “Trigger”.
Filter Choose to permit or block the IP address(es) which can access this camera.
UpnP
Allow this camera to be detected among devices within the same network area for easy and
quick usage.
Camera Camera
1. Set the camera title.
2. Specify the snapshot path.
3. Select the streaming settings based on your network environment.
Preset Set the preset points for the DPTZ function.
Cruise Set the cruise mode when the auto mode is enabled: Sequence or Auto Pan.
Color Adjust the color performance.
Record Timer Record Configure the record function.
Record Timer Schedule the PIR and external alarm recording.
Storage Memory Check the current storage capacity and clear all recorded data when needed.
Trigger Trigger Configure how the camera reacts for any event.
Push Video Set Push Video rules.
General General
1. Select the language of the web browser.
2. Check the MAC address of the camera.
3. Lock camera access after the specified time.
Time Set daylight saving time and the current time.
Server Log
Available for Supervisor only.
Check the system event logs.
Online
Available for Supervisor only.
Check the current online user(s).
Account
Available for Supervisor only.
1. Create a new user account with different access privilege.
2. Modify or delete an existing user account.
Maintenance
Available for Supervisor only.
1. Check the current firmware version and upgrade your camera.
2. Copy system configurations.
3. Download the video player to play the recorded data.