Velleman CAMIP13 Quick Installation Guide User Manual

Page 15

3.3.3 Cruise

Note: Before using this function, make sure you have finished setting several preset points.

Here defines how the auto mode of the camera is going to work when

is selected: Sequence or Auto Pan.

Auto Pan

When “Auto Pan” is selected here and

is clicked on the DPTZ page, the camera will start panning in the 5x

zoom-in ratio.

Sequence

When “Sequence” is selected here and

is clicked on the live view page, the camera will start patrolling each

preset point defined in “Sequence”.

Step1: Click “Add” to choose a preset point from the drop-down list, and select the duration to stay at this point

from 1 ~ 60 seconds.

Then, click “Save” to confirm.

Step2: Click “Add” again to add more preset points.

To modify the existing preset point setting, click “Edit”. To insert a preset point before the selected point,
click “Insert”. To remove the added preset point, click “Delete”.

Step3: When all the points are added, click “Save” to confirm.