Velleman WT3116 - Manual (Page 13)

WT3116_v2 VELLEMAN - 13 -
 Match timer stopped too late: use and to adjust the difference; use shot clock to adjust the round
difference.
 Round time reaches 0:00 during countdown: the match will continue without sounding the buzzer so the
countdown will not be interrupted.
 Modifying round/break times: press and reset.
 In the final round, the break time will not display.
F. ELECTRONIC METRONOME
Upper display: rhythm
Lower left display: number of buzzes per minute
Lower right display: length of a buzz
Electronic Metronome
Operation Key Display Buzzer
Set buzz length
0
120 6
Set buzz number
0
113 6
Start metronome
1
113 6
Stop metronome
5
113 6
Reset metronome
0
113 6
G. PROGRAM TIMER (interval training)
The timer may be programmed to consecutively count down and display max. 9 time periods.
Upper display: timer (max. 99:59)
Lower left display: number of repetitions (max. 9)
Lower right display: program number (max. 9)
Program Timer
Operation Key Display Buzzer
1. Set desired time for program 1 (P1)
5:00
1 P1
2. Enter P1 into memory and enter times for following programs if
desired
0:00
1 P2
3. Complete program setting. Set the desired number of repetitions
using the shot clock . Press and . The current round is
displayed and the timer will stop.
5:00
1 P1
4. P1 will start counting down and buzzer will sound when it reaches
0:00. P2 will subsequently start. Completion of all programs is
considered one round.
4:59
1 P1
0:00