Uncle Milton Dream Fairy Room Light - Manual (Page 2)

Wall Installation
Note: Product is only intended to mount on a
vertical wall.
1. Locate stud in wall or use the wall mounting
hardware included to screw the Wall Mounting
Bracket to the wall as shown.
3. Firmly insert the Post on the back of the Fairy into
Wall Mount as shown.
Operation
IMPORTANT: The on/off switch located on the back of the Wall Mount must be switched to the “ON” position.
1. Use the Remote control to cycle thru the color modes and select your favorite.
— Color mode 1 will gradually transition through all 7 colors.
— Color modes 2-8 are individual colors
2. To turn your Dream Fairy off, press and hold the Remote button.
Note: To conserve battery life, your Dream Fairy will turn off automatically after 15 minutes.
2. Slide the Wall Mount onto the Wall Mounting
Bracket as shown. Note: Prior to sliding the Wall
Mount on to the Wall Mounting Bracket, make
sure the on/off switch located on the back of the
Wall Mount is switched to the “ON” position.
2164-0250-0411
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE — DO NOT DISCARD
Questions? Visit unclemilton.com
MANUFACTURED BY UNCLE MILTON INDUSTRIES, INC.
P.O. Box 6281
THOUSAND OAKS, CA 91359 USA
©2011 UMI. All rights reserved. ® and TM designate trademarks of Uncle Milton Industries, Inc.
MADE IN CHINA
Product must be assembled by an adult.
This product contains small parts which are
necessary for assembly. Prior to and during
assembly of this product, keep small parts
out of children’s reach. Small parts pose a
choking hazard to children under 3 years.