Uncle Milton RC Scorpion - Manual (Page 3)

Installing batteries
into controller
1. Using a Phillips head screwdriver,
remove the battery compartment
cover from the back of the
controller (see Figure 2).
2. Insert 2 “AAA”/“LR03” batteries
and replace cover. Make
sure the “+” and “–” ends are
inserted correctly, as indicated
in the battery compartment.
Using your RC Scorpion
1. Turn the power switches to the “ON”
position on both the controller and
scorpion (see Figures 1 and 2).
2. Move the scorpion forward or make it
turn using the buttons on the
controller (see Figure 3).
Note: For best performance use your
RC Scorpion on a smooth flat surface
like a hardwood floor.
Controller
power
switch
Rotate
button
Forward
button
Figure 2
Figure 3