Milton CAT PM 102 - Manual (Page 9)

9
Rotor Housing
■ Rotor housing is made with hi-grade
anti-wear material for long service
life.
■ Large discharge opening clears out
the rotor housing fast for increased
production and reduced tool wear.
■ Side plate contact surfaces features
wear-resistant materials for reduced
wear and longer service life.
■ Floating moldboard with adjustable
down pressure is standard.
■ Height control for rotor door located
at operator’s station and at two
ground level control stations.
Steering
Hydraulic power-assist steering with
steering wheel on operator’s console.
Features
■ Double-acting steering cylinders
control the front and right rear tracks.
■ Steering of the right rear track is
electronically controlled with angle
adjusted in relation to the position of
the front tracks.
Turning Radius (to the right):
Track undercarriage 3.45 m (11' 3")
Wheel undercarriage 2.10 m (6' 8")
Brakes
Primary Brake Features
■ Closed-loop hydrostatic drive
provides dynamic braking during
normal operation.
Parking Brake Features
■ Spring-applied/hydraulically-released
multiple disc type brake mounted on
each gear reducer. Brakes are applied
automatically when propel lever is in
the neutral detent position.
■ Secondary brakes are activated by a
button on the operator’s console, loss
of hydraulic pressure in the brake
circuit or when the engine is shut
down.
■ Propel pump is destroked when
parking brake is engaged. Propel
lever must be returned to neutral after
brake is released before machine will
propel.
Conveyor System
■ Collecting conveyor is driven by a
high torque hydraulic motor to ensure
maximum production and clearing
out the rotor housing effectively.
■ Variable belt speed control for
collecting and front loading
conveyors controls loading of milled
materials to closely match material
type and amount.
■ Both conveyor belts can be reversed
for quick clean out.
■ Folding front loading conveyor
facilitates machine transportation.
Collecting Conveyor
Width 550 mm 21.6"
Speed 252 mpm 827 fpm
Upper Conveyor
Length 6.3 m 20' 6"
Width 600 mm 23.6"
Speed 252 mpm 827 fpm
Swing (from center) 41 degrees
PM-102 specifications
Water Spray System
■ Centrifugal pump supplies water to
spray nozzles for dust control and
belt lubrication.
■ Water spray nozzles focuses the
water spray in a flat fan pattern to the
rotor for better cooling of cutting
tools.
■ Nozzles are easily removed for
inspection and replacement without
the need for tools.
■ Standard system includes gauges to
monitor water pressure, a low water
level indicator and water control
valves to conserve water usage.
■ Water tank can be filled from the top
of the machine or at ground level.
Hydraulic System
■ Pumps for propel, collecting and
upper conveyors, auxiliary hydraulics
and cooling fan are installed on the
engine mounting pad.
■ Hydraulic oil cooler located at the
rear of the machine is designed for
efficient cooling and easy access for
cleaning.
■ Three-micron filtration on pressure
side of auxiliary flow and seven-
micron filtration on return side.
■ Quick-connect hydraulic test ports
simplify system diagnostics.