Milton CAT PM 102 - Manual (Page 6)

6
Steering Right Rear Track
Optimum machine handling for precise control and production.
Precise control. A microprocessor
electronically controls the steering
angle of the right rear track. The rear
track steering angle is automatically
adjusted in relation to the position of
the front tracks.
Enhanced steering ability. The
machine’s rear track steering feature
facilitates operation in confined areas
and ensures a close cut around cul-de-
sacs or turns. The right rear track steers
in both positions, whether positioned
within or outside the cutting width.
Flush Cutting Feature
Full flush cutting operation with hydraulic control of the right rear leg, allows the
PM-102 to be used up close to a curb, wall or guard rail.
Flush cutting. The right rear leg can be
swung in within the machine’s cutting
width for full flush cutting applications.
With the right rear leg swung in, the
machine can cut close to a wall, barrier
or other vertical obstruction.
Exclusive Caterpillar single-piece
swing-arm design.
The swing-in arm mechanism ensures
increased rigidity eliminating excessive
wear for increased component life.
Automatic control. The rear leg
swing-in system is automatic and
controlled from the operator’s station.
The operator is not required to leave the
seat while positioning the right rear leg
within the machine’s cutting width.
Leg in the full-out position.
Leg in the full-in position.
Leg in the swing-in position.