Milton CAT PM 102 - Manual (Page 10)

10 PM-102 specifications
Automatic Grade and Slope System.
Automatically controls rotor depth and
cross slope to a preset cutting depth.
Contacting wire rope grade sensor
measures side plate movement that
enables the entire length of the side plate
to become a mini averaging ski for
optimum grade matching. System also
includes a cross slope sensor to meet
slope applications/requirements in job
specifications. Hydraulically Operated Canopy. Full
width canopy with two side extending
wings and front and rear windshields
provides optimum operator comfort and
protection. Canopy can be hydraulically
lowered for transportation.
High Pressure Washdown System. This
system uses water from the water spray
system tank to help with machine clean-
up at the end of each day’s operation.
System includes a spray wand and hose
with a quick-connect coupler.
Water Tank High Capacity Refilling
Pump. A hydraulically driven water
pump provides fast water tank refilling.
Roading Light Package. Front and
rear-facing headlights with directional
indicators. Light package used for
highway transport purposes only.
Optional Equipment
N ote: Some options listed may be an option in some areas and standard in others. Consult your dealer for specifics.
Rotor Specifications
■ Tools are mounted in durable three-
piece, quick release tool holders.
■ Holders feature a tapered fit to
maintain tightness in holder base.
■ The quick release tool holders allow
fast and easy replacement of tools.
■ Large replaceable carbide faced
loading paddles effectively moves
milled materials onto collecting
conveyor resulting in increased
production.
Rotor
Cutting width 1000 mm 40"
Cutting depth 305 mm 12"
Number of tools 98
Tool spacing (tip) 15 mm 0.6"
Grade and Slope Control
Machine elevation – rotor depth and cross slope controlled manually by operator is
standard. Automatic rotor depth and slope control is optional and features electronic
over hydraulic control. Slope sensor adds versatility.
Features
■ Machine elevation controls located on the operator’s console allows rotor depth and
cross slope to be controlled manually. Visual depth gauge displays depth of cut.
■ The optional AUTOMATIC grade and slope control automatically controls rotor
depth and cross slope to a preset cutting depth. Setting cutting depth is easily
accomplished first in manual mode by using the adjustment knob on the controller.
■ Wire rope contacting grade sensor measures side plate movement that enables the
entire length of the side plate to become a mini averaging ski for optimum grade
matching.
Service Refill Capacities
Liters Gallons
Fuel tank 400 105
Cooling system 35 9.3
Engine oil w/filter 31 8.1
Propel planetary
gear reducer (each)
0.9 0.24
Hydraulic tank 110 29
Water spray system 1060 280
Frame
Fabricated from heavy gauge steel
plates and structural steel tubing. Track
assembly features track frame stops to
limit track angles to improve machine’s
ability to propel out of deep cuts. Top
of deck and steps features non-skid
treads for sure footing.
Electrical
The 24-volt electrical system consists
of two maintenance-free Cat batteries.
Electrical wiring is color-coded,
numbered and labeled with component
identifiers. The starting system provides
750 cold cranking amps (cca). The
system includes a 65-amp alternator.