Milton CAT 950H - Manual (Page 24)

24 950H Wheel Loader specifications
2.90 2.90 5.20
3.75 3.75 6.75
2.45 2.44 4.62
3.20 3.19 6.04
2984 2969 3073
9'9" 9'9" 10'1"
2871 2712 2716 494
9'5" 8'11" 8'11" 1'7"
1297 1425 1278 67
4'3" 4'8" 4'2" 0'3"
2588 2789 2707 406
8'6" 9'2" 8'11" 1'4"
92 62 92 23
3.62 2.44 3.62 0'1"
8068 8300 8187 503
26'6" 27'3" 26'10" 1'8"
5391 5391 6005 495
17'8" 17'8" 19'8" 1'7"
7068 7130 7141 186
23'2" 23'5" 23'5" 0'7"
12 472 12 609 12 356 –2094
27,501 27,803 27,245 –4,617
10 894 11 027 10 713 –1949
24,021 24,315 23,622 –4,298
151.0 159.0 135.0 –10.0
33,975 35,775 30,375 –2,250
18 540 18 457 19 213 1268
40,881 40,698 42,365 2,796
Bolt-on
edges
Bottom
strap
teeth Bolt-on
edges
Change
in specs
* Static tipping loads and operating weights shown are based on
standard machine configuration with 23.5R25 tires, full fuel tank,
coolants, lubricants, air conditioner, ride control and operator.
** Measured 102 mm (4.0") behind tip of cutting edge with bucket
hinge pin as pivot point in accordance with SAE J732C.
(§) Specifications and ratings conform to all applicable standards
recommended by the Society of Automotive Engineers,
including SAE Standard J732C governing loader ratings.
Waste/
Coal
Bucket High Lift Rock Buckets