Milton CAT PM 200 - Manual (Page 15)

15 PM-200 specifications
PM-200 Specifications
Operating Weights
Machine
30 900 kg 68,135 lb
on front tracks 16 100 kg 35,500 lb
on rear tracks 14 800 kg 32,635 lb
Shipping Weights
Machine
28 000 kg 61,740 lb
on front tracks 12 650 kg 27,895 lb
on rear tracks 15 350 kg 33,845 lb
Machine Dimensions (operating)
Overall length (conveyor up)
13.94 m (45' 7")
Overall machine width 2.9 m (9' 5")
Maximum height (canopy raised) 3.95 m (12' 7")
Minimum height 2.93 m (10' 6")
Maximum truck clearance 4.6 m (15')
Rotor ground clearance 356 mm (14")
Conveyor swing 48 degrees left or right of center
Collecting conveyor width 800 mm (31.5")
Upper conveyor width 800 mm (31.5")
Inside turning radius 2.0 m (6' 5")
Machine Dimensions (shipping)
Overall length of base machine
7.5 m (24' 6")
Length (conveyor folded) 11.38 m (37' 3")
Height (conveyor folded) 3.15 m (10' 3")
Maximum width 2.5 m (8' 2")
Power Train
Engine
C18 with ACERT ® Technology
Gross power (SAE J1995) 429 kW 575 hp
Speeds
Operating 38 mpm 125 fpm
Travel 5.9 km/h 3.6 mph
Drive train (propel) Hydrostatic w/planetary
Track length 1640 mm (64.5")
Track width 300 mm (12")
Rotor Drive System
Rotor drive
Two six-rib high tensile belts
Transmission Mechanical
Clutch Hydraulic/wet multi-disc
Gear reduction Planetary
Speed 114 rpm
Rotor
Cutting width
2010 mm (79")
Cutting depth 320 mm (12.6")
Number of tools 178
Tool spacing (tip) 15 mm (0.6")
Miscellaneous
Electrical system
24 VDC
Steering system Front/Rear
Water tank capacity 3500 liters 925 gal
Fuel capacity 1100 liters 290 gal