Milton CAT 924Hz - Manual (Page 10)

924Hz Wheel Loader Specifications
10
Dimensions
All dimensions are approximate. Dimensions may vary with bucket. Refer to Operating Specifications.
1 Height to top of ROPS/FOPS 3227 mm (10 ft 7 in)
2 Height to top of exhaust stack 3211 mm (10 ft 6 in)
3 Height to top of hood 2219 mm (7 ft 3 in)
4 Height to center of axle 692 mm (2 ft 3 in)
5 Ground clearance 436 mm (1 ft 5 in)
6 Overall length 6898 mm (22 ft 8 in)
7 Length – rear axle to bumper 1962 mm (6 ft 5 in)
8 Center line of front axle to hitch 1400 mm (4 ft 7 in)
9 Wheel base length 2800 mm (9 ft 2 in)
10 Dump clearance at maximum lift and 45° dump 2828 mm (9 ft 3 in)
11 Bucket clearance at maximum lift and level 3432 mm (11 ft 3 in)
12 Bucket pin height at maximum lift 3757 mm (12 ft 4 in)
13 Overall height – bucket raised 4809 mm (15 ft 9 in)
14 Reach at maximum lift and 45° dump 791 mm (2 ft 7 in)
15 Rack back angle at maximum lift 58°
16 Dump angle at maximum lift 45°
17 Rack back angle at ground 44°
18 Rack back angle at carry 48°
19 Carry height 435 mm (1 ft 5 in)
20 Digging depth 42 mm (2 in)
Dimensions listed are for 924Hz with 1.8 m 3 (2.3 yd 3 ) pin-on bucket with bolt-on cutting edge, cab with A/C, optional counterweights, limited slip
axles, heavy duty rear brakes, additional guarding, sound suppression, work tool, 80 kg (176 lb) operator and Michelin 20.5 R25 L3 XHA tires.
20.5 R25 (L-3) XHA Tires 17.5-25 12PR (L-2) Tires
21 Width at tread center 1880 mm (6 ft 2 in) 1880 mm (6 ft 2 in)
22 Overall width over tires 2492 mm (8 ft 2 in) 2356 mm (7 ft 9 in)
23 Minimum turning radius over tires 5104 mm (16 ft 9 in) 5070 mm (16 ft 8 in)
24 Minimum turning radius over bucket at ground level 5598 mm (18 ft 4 in) 5614 mm (18 ft 5 in)
25 Steering angle – left/right 40° 40°
Change in vertical dimension no change no change –44 mm (–2 in)
15
16
18
17
19
1
2
3
4
5
7
9
20
10
11
12
13 14
8
6
24
23
25
22
21